The Brother printers are always considered as professional printers that have the ability to print in high volumes without compromising quality. From usual printing to brochures and booklets, brother printer is always there to help you. This printer offers relatively fast and high-quality prints to ascertain improvement in business productivity with crisp text and excellent graphics. For quality printing, all of brother laser printers rely on separate Brother Drum cartridge and Brother Drum unit DR420.
The laser printer puts the toner on the roller called "The photosensitive drum" inside the drum unit, and then prints letters and images by fixing toner to the paper by heat and pressure. To keep good print quality, the Brother machine detects the quality deterioration of the drum unit automatically. If the Brother machine displays "Replace drum" error message, you need to replace the drum unit.
When users get poor quality prints, they always think that it’s the toner cartridge that is the main culprit, but it’s not true always. Sometimes, the problem is associated with Brother Drum unit as it is also a consumable with average life three times more than Brother Toners. If you are not getting consistent print quality even after replacing the toner, it’s time to reinstall a brand new Brother Drum unit.
Step-By-Step Instructions for Brother Drum Replacement
Step 1: Turn on your Brother printer. Allow it to cool itself by leaving for at least 10 minutes.
Step 2: Open its front cover. Don’t touch any part to prevent degradation to print quality as all of its parts are extremely delicate that must be handled carefully.
Step 3: Take out drum unit and toner cartridge from the assembly carefully as it may contain toner.
Step 4: Press the lock lever and down and take out toner cartridge from drum unit.
Step 5: Unpack original Brother Drum unit DR420.
Step 6: Firmly put the toner cartridge into new drum unit DR420 to lock into its place. Lifting of lock lever will confirm installation of cartridge in a proper manner.
Step 7: Reinstall the toner cartridge and drum unit back into printer.
Step 8: Close front cover.
Reset Life Of Brother Drum Cartridge:
Resetting of drum unit is also an integral part of install else its software will detect the new drum unit as the old one. To reset, follow simple steps:
For HL printers:
Push and hold down “Go” button for few seconds until you see all the LEDs lightening up.
Once all the LEDs are lit, release “Go” button.
Make sure that the drum light is off.
Your drum unit counter has been reset.
For MFC and DCP Multiple Function Printers:
Open front door and push “clear” or “option” button.
You’ll see two options: “Change drum, 1-Yes, 2-No”.
Press 1 to accept. It will reset the drum life.
Close the front door.
If you’re looking to purchase quality office products and Cartridge then visit www.aaatoner.com , a convenient place for your office accessories.